Skip to content

Professional Series In-Ceiling

Product Overview

Sonance Professional Series has been engineered with a level of attention to detail not typically seen in the commercial audio industry.

The range features a full-fidelity transformer for uncompromised 70V/100V performance, heavy duty voice coils for reliability at high SPL, high excursion woofer for extended bass extension and chambered 1" pivoting tweeter for precise high-end detail and exceptional off-axis performance.

Available in 4", 4" Low Profile, 6.5", 6.5" Low Profile, 8" 2-Way and an 8" Woofer. An additional lower-cost 4" and 6.5" provide the benefits of Professional Series in budget-conscious projects.

Sonance Professional Series In-Ceiling Speakers feature a bezel-less grille design to minimize visual distraction and reduce shadow lines.

The optional black or white square grille adapter allows the speakers to match the aesthetic of downlights or HVAC grilles.

Black grilles in round or square are also available, eliminating the need to order a specific black speaker.

A one-piece grille allows for a one-step painting process, while the magnetic retention simplifies installation and reduces the risk of damage during fitment and removal.

The sealed enclosure incorporates cable and conduit clamping and knock-out. An easily-accessible Euroblock connector provides input and loop through connections, while the seismic attachment provides added security when used in suspended ceiling applications.

UL 1480 and UL 2043 certified and shipped with Tile Bridge and C-Ring.

EASE Address software for Sonance Professional Series provides simple and accurate system layout of distributed audio systems, ensuring perfect coverage is always achieved.

Features

  • Class-leading sensitivity & sonic performance
  • Exceptional off-axis response
  • Heavy duty voice coil for longevity and reliability
  • Full-fidelity transformer for uncompromised tonality
  • Consistent voicing across product range
  • Bezel-less design for clean and minimalistic aesthetic
  • Optional black grilles in round or square
  • Magnetic grille retention for fast installation and removal
  • Finger-adjustable selector tap
  • One-step simplified painting process
  • Smallest in class form factor
  • Boardrooms & Corporate Offices
  • Shopping Malls, Retail Spaces & Showrooms
  • Restaurants, Bars & Lounges
  • Galleries & Museums
  • Casinos, Convention Centers & Hotels
  • Houses of Worship
  • Educational Facilities

Product Specifications

Frequency Range (-10dB)

70 Hz - 25kHz

Frequency Range (-3dB)

95Hz - 20kHz

Power Capacity

60 Watts Continuous Program Power | 30 Watts Continuous Pink Noise

Nominal Sensitivity

87dB

Nominal Coverage Angle

120 degrees conical coverage

Directivity Factor (Q)

7.6

Directivity (DI)

8.1dB

Rated Maximum SPL

102dB @ 1 meter (3.3 feet) average, 108dB peak

Rated Impedance

8 Ohms nominal, 6 Ohms minimum

Transformer Taps

25W, 12.5W, 6.3W and (3.2W @70V)

Crossover Point

3000Hz

Overall Dimensions

6.3" x 6.5” deep (160mm x 165mm)

Cut Out Dimensions

5.875" Diameter (149mm)

Net Weight

5.0lbs (2.27kg) ea 

Shipping Weight

21.55 lbs (9.77kg) pair

Unit of Measure

Pair (Single units upon request)

Grille

Supplied with bezel-less white grille. Optional black grille, or square adapter with black or white grille

LF Driver

4" (100mm) Polypropylene Cone, Butyl Rubber Surround

HF Driver

.75" (19mm) Cloth dome, Ferrofluid cooled

Input Connector

Four pin Euroblock with loop output connections

Knockout

Single .75" with cable relief

Safety Agency

UL 2043, UL 1480, NFPA 90A and NFPA 70, S7232, (EN54-24 coming soon)

Ceiling Thickness Range

.125” - 2.0” (3mm - 50mm)

Suspension Points

One, on top surface

Included Accessories

 Bracket/Tile Bridge

Product Details

Frequency Range (-10dB)

60 Hz - 25kHz

Frequency Range (-3dB)

83Hz - 20kHz

Power Capacity

100 Watts Continuous Program Power | 50 Watts Continuous Pink Noise

Nominal Sensitivity

91 dB

Nominal Coverage Angle

120 degrees conical coverage

Directivity Factor (Q)

7.8

Directivity (DI)

8.2dB

Rated Maximum SPL

108dB @ 1 meter (3.3 feet) average, 116dB peak

Rated Impedance

8 Ohms nominal, 6 Ohms minimum

Transformer Taps

32W, 16W, 8W and (4W @70V)

Crossover Point

2750Hz

Overall Dimensions

9.13" x 8.86” deep (232mm x 225mm)

Cut Out Dimensions

8.25" (210mm)

Net Weight

6.88 lbs (3.12kg) each

Shipping Weight

27.35 lbs (12.41kg) pair 

Unit of Measure

Pair (Single units upon request)

Grille

Supplied with bezel-less white grille. Optional black grille, or square adapter with black or white grille

LF Driver

6.5" (165mm) Polypropylene Cone, Butyl Rubber Surround

HF Driver

.75" (19mm) Cloth dome, Ferrofluid cooled

Input Connector

Four pin Euroblock with loop output connections

Knockout

Single .75"

Safety Agency

UL 2043, UL 1480, NFPA 90A and NFPA 70, S7232, (EN54-24 coming soon)

Ceiling Thickness Range

.125” - 2.0” (3mm - 50mm)

Suspension Points

One, on top surface

Included Accessories

Bracket/Tile Bridge

Product Details

Frequency Range (-10dB)

57Hz - 25kHz

Frequency Range (-3dB)

75Hz - 20kHz

Power Capacity

60 Watts Continuous Program Power | 30 Watts Continuous Pink Noise

Nominal Sensitivity

87dB

Nominal Coverage Angle

120 degrees conical coverage

Directivity Factor (Q)

7.6

Directivity (DI)

8.1dB

Rated Maximum SPL

105dB @ 1 meter (3.3 feet) average, 110dB peak

Rated Impedance

8 Ohms nominal, 6 Ohms minimum

Transformer Taps

30W, 15W, 7.5W (3.8W 70V)

Crossover Point

3000Hz

Overall Dimension

9.13” Diameter x 3.43” Depth (232mm x 87mm)

Cut Out Dimension

8.25” Diameter (210mm)

Net Weight

6.00lbs (2.72kg) each

Shipping Weight

25.60lbs (11.62kg) pair

Unit of Measure

Pair (Single units upon request)

Grille

Supplied with bezel-less white grille. Optional black grille, or square adapter with black or white grille 

LF Driver

4" (100mm) Polypropylene Cone, Butyl Rubber Surround

HF Driver

1" (25mm) Cloth Dome, Pivoting, Ferrofluid cooled

Input Connector

Four pin, Euroblock with loop output connections

Knockout

One back-mounted, one side-mounted .75" (19mm)

Safety Agency

UL 2043, UL 1480, NFPA 90A and NFPA 70, S7232

Ceiling Thickness Range

-

Suspension Points

One, on top surface

Product Details

Frequency Range (-10dB)

49Hz - 25kHz

Frequency Range (-3dB)

65Hz - 20kHz

Power Capacity

120 Watts Continuous Program Power | 60 Watts Continuous Pink Noise

Nominal Sensitivity

91dB

Nominal Coverage Angle

120 degrees conical coverage

Directivity Factor (Q)

6.5

Directivity (DI)

7.9dB

Rated Maximum SPL

108dB @ 1 meter (3.3 feet) average, 116dB peak

Rated Impedance

8 Ohms nominal, 6 Ohms minimum

Transformer Taps

60W, 30W, 15W (7.5W 70V)

Crossover Point

2750Hz

Overall Dimension

11.06” Diameter x 4.37” Depth (281mm x 111mm)

Cut Out Dimension

10.125” Diameter (257mm)

Net Weight

10.00lbs (4.53kg) each (Preliminary spec - may vary)

Shipping Weight

38.00lbs (17.23kg) pair  (Preliminary spec - may vary)

Unit of Measure

Pair (Single units upon request)

Grille

Supplied with bezel-less white grille. Optional black grille, or square adapter with black or white grille 

LF Driver

6.5” (165mm) Polypropylene Cone, Butyl Rubber Surroun

HF Driver

1" (25mm) Cloth Dome, Pivoting, Ferrofluid cooled

Input Connector

Four pin, Euroblock with loop output connections

Knockout

One back-mounted, one side-mounted .75" (19mm)

Safety Agency

UL 1480, UL 2043, NFPA 90A, NFPA 70

Maximum Ceiling Thickness

1.732” (44mm) 

Suspension Points

One, on top surface

Product Details

Frequency Range (-10dB)

57Hz - 25kHz

Frequency Range (-3dB)

75Hz - 20kHz

Power Capacity

60 Watts Continuous Program Power | 30 Watts Continuous Pink Noise 

Nominal Sensitivity

87dB

Nominal Coverage Angle

120 degrees conical coverage

Directivity Factor (Q)

7.6

Directivity (DI)

8.1dB

Rated Maximum SPL

105dB @ 1 meter (3.3 feet) average, 110dB peak

Rated Impedance

8 Ohms nominal, 6 Ohms minimum

Transformer Taps

30W, 15W, 7.5W (3.8W 70V)

Crossover Point

3000Hz

Overall Dimension

6.3" Diameter x 7.01" Depth (160mm x 178mm)

Cut Out Dimension

5.875" Diameter (149mm)

Net Weight

5.63lbs (2.55kg) each

Shipping Weight

21.80lbs (9.89kg) pair

Unit of Measure

Pair (Single units upon request)

Grille

Supplied with bezel-less white grille. Optional black grille, or square adapter with black or white grille 

LF Driver

4" (100mm) Polypropylene Cone, Butyl Rubber Surround

HF Driver

1" (25mm) Cloth Dome, Pivoting, Ferrofluid cooled

Input Connector

Four pin Euroblock with loop output connections

Knockout

One, side-mounted .75"

Safety Agency

UL 2043, UL 1480, NFPA 90A and NFPA 70, S7232

Ceiling Thickness Range

-

Suspension Points

One, on top surface

Included Accessories

Bracket/Tile Bridge

Product Details

Frequency Range (-10dB)

49Hz - 25kHz

Frequency Range (-3dB)

65Hz - 20kHz

Power Capacity

120 Watts Continuous Program Power | 60 Watts Continuous Pink Noise

Nominal Sensitivity

91dB

Nominal Coverage Angle

120 degrees conical coverage

Directivity Factor (Q)

6.5

Directivity (DI)

7.9dB

Rated Maximum SPL

108dB @ 1 meter (3.3 feet) average, 116dB peak

Rated Impedance

8 Ohms nominal, 6 Ohms minimum

Transformer Taps

60W, 30W, 15W (7.5W 70V)

Crossover Point

2750Hz

Overall Dimension

9.13” Diameter x 8.86” Depth (232mm x 225mm)

Cut Out Dimension

8.25” Diameter (210mm)

Net Weight

9.38lbs (4.25kg) each

Shipping Weight

32.36 lbs (14.68kg) pair

Unit of Measure

Pair (Single units upon request)

Grille

Supplied with bezel-less white grille. Optional black grille, or square adapter with black or white grille 

LF Driver

6.5” (165mm) Polypropylene Cone, Butyl Rubber Surround

HF Driver

1" (25mm) Cloth Dome, Pivoting, Ferrofluid cooled

Input Connector

Four pin Euroblock with loop output connections

Knockout

One, side mounted .75”

Safety Agency

UL 1480, UL 2043, NFPA 90A, NFPA 70

Maximum Ceiling Thickness

1.732” (44mm) 

Suspension Points

One, on top surface

Included Accessories

Bracket/Tile Bridge

Product Details

Frequency Range (-10dB)

41Hz – 25kHz

Frequency Range (-3dB)

55Hz – 20kHz

Power Capacity

-

Nominal Sensitivity

91dB

Nominal Coverage Angle

120 degrees conical coverage

Directivity Factor (Q)

7.6

Directivity (DI)

8.1dB

Rated Maximum SPL

110dB @ 1 meter (3.3 feet) average, 116dB peak

Rated Impedance

8 Ohms nominal, 6 Ohms minimum

Transformer Taps

60W, 30W, 15W (7.5W 70V)

Crossover Point

2750Hz

Overall Dimension

11.06” Diameter x 9.84” Depth (281mm x 250mm)

Cut Out Dimension

10.125” Diameter (257mm)

Net Weight

13.41lbs (6.08kg) each

Shipping Weight

43.08lbs (19.54kg) pair

Unit of Measure

Pair (Single units upon request)

Grille

Supplied with bezel-less white grille. Optional black grille, or square adapter with black or white grille 

LF Driver

8” (203mm) Polypropylene Cone, Butyl Rubber Surround

HF Driver

1” (25mm) Cloth Dome, Pivoting, Ferrofluid cooled

Input Connector

Four pin, Euroblock with loop output connections

Knockout

One, side mounted .75”

Safety Agency

UL 1480, UL 2043, NFPA 90A, NFPA 70

Maximum Ceiling Thickness

1.732” (44mm) 

Suspension Points

One, on top surface

Included Accessories

Bracket and Tile Bridge

Product Details

Frequency Range (-10dB)

32Hz – 300Hz

Frequency Range (-3dB)

50Hz – 150Hz

Power Capacity

200 Watts Continuous Program Power | 125 Watts Continuous Pink Noise

Nominal Sensitivity

89 dB

Nominal Coverage Angle

180 degrees conical coverage

Directivity Factor (Q)

N/A

Directivity (DI)

N/A

Rated Maximum SPL

110dB @ 1 meter (3.3 feet) average, 116dB peak

Rated Impedance

8 Ohms nominal, 6 Ohms minimum

Transformer Taps

120W, 60W, 30W, (15W 70V)

Crossover Point

150Hz

Overall Dimensions

11.06” Diameter x 9.84” Depth (281mm x 250mm)

Cut Out Dimensions

10.125” (257mm)

Net Weight

14.95lbs (6.78kg) each

Shipping Weight

25.35lbs (11.50kg) each

Unit of Measure

Each

Grille

Supplied with bezel-less white grille. Optional black grille, or square adapter with black or white grille

LF Driver

8” (203mm) Polypropylene Cone, Butyl Rubber Surround

HF Driver

N/A

Input Connector

Four pin Euroblock with loop output connections

Knockout

One, side mounted .75”

Safety Agency

UL 1480, UL 2043, NFPA 90A, NFPA 70

Maximum Ceiling Thickness

1.732” (44mm) 

Suspension Points

One, on top surface

Included Accessories

Bracket/Tile Bridge

Product Details

Experiences

At Sonance, we pride ourselves on understanding how best to apply our products to your day-to-day experiences and the spaces they happen in. The highlighted links below show the spaces we believe are best suited for our Invisible Series. But feel free to explore the ideal audio experience in any of these spaces.